Videos

This video will walk you through the process for the repair of a tool. It tells about the way in which a tool is checked in, evaluated and then repaired. It also tells the customer what to expect when they have a tool at Winshaw going through the process.

A quick video showing the most basic set up for a high pressure (10,000 PSI / 700 bar) hydrotest setup. This video shows the air inlet and outlet, the fluid inlet and outlet and the way to isolate the gauge and test from the pump. In order to have a fully functioning system you would obviously want to add a fluid source, air source and FRL (Filter, Regulator & Lubricator).

This is a short video of a TWH54N model Hydraulic Torque Wrench being used to "nipple up" a BOP. This shot is particularly interesting since the location is somewhat tight and required a very low profile tool.

A quick video showing the most basic set up for a high pressure (10,000 PSI / 700 bar) hydrotest setup. This video shows the air inlet and outlet, the fluid inlet and outlet and the way to isolate the gauge and test from the pump. In order to have a fully functioning system you would obviously want to add a fluid source, air source and FRL (Filter, Regulator & Lubricator).

The video shows a cut away view of a Hi Force Hydraulic Tools hydraulic bolt tensioner working. Notice the cavities which are filling with oil to extend the cylinder. Contact www.winshawhydraulictools.com for more information.

This video shows how a single speed, manual, hydraulic pump works. Notice the way the oil is recirculated to the reservoir when the pressure reaches the max working pressure. Contact us at www.winshawhydraulictools.com for more information.

This video shows how a two speed, manual hydraulic pump works. Notice that the second speed kicks in automatically at a preset pressure. Contact us at www.winshawhydraulictools.com for more information.

This video shows an up close view of a large nut splitter working on a heavy walled nut. By turning up the volume you'll be able to hear the pump working in the background which supplies the pressure to the splitter. Please contact us at www.winshawhydraulictools.com for more information.

General overview and description of the HSS102 model cylinder as well as an introduction to the naming of models.